Provide customers a comprehensive purchasing platform of industrial and electric heat ceramic products
Description
1.Made of al2o3 ceramic
2.Used for milling
3.Quality is guaranteed
4.Best price
Introduction:
Alumina ceramic mill pot is a kind of mill pots which has wear-resistance.We can also supply plain ceramic mill pot:99% ceramic mill pot.The spe:0.5 litre,1.2 litre(standing),1.2 litre(lying),3 litre,5 litre,10 litre,20 litre.
|
Al2o3 content: |
65%,95%,99% |
|
Rockwell hardness |
≥80, impact resistance |
|
Water absorption |
≤0.02 |
|
Vol.density |
≥3 |
|
Wear-resistance coefficient |
≤0.9 |
|
Application |
Electrical eramic,magnetic material,pigment and dope,special cement, porcelain enamel and glaze |
The mill pot produced by gongtao company have monolithic construction,big round arc angle.The mouth of pot can be sealed and opened easily,tight seal,beautiful sculpt,hard and durable.Bad phenomena such as gap,leak,material stock,dead space ect can not occur in use.And Gongtao company can also offer you rock bottom price for 65% al2o3 ceramic mill pot.
|
Item |
Alumina milling pot |
|
Chemical component |
Al2O3 |
≥99 |
|
R2O |
≤0.2 |
|
Fe2O3 |
≤0.1 |
|
SiO2 |
≤0.2 |
|
Vol.density(g/cm2) |
≥3.80 |
|
Apparent Porosity(%) |
<1 |
|
Bending Strength(Mpa) |
>350 |
|
Compression strength
(Mpa) |
>12000 |
|
Permittivity∑(1MHz) |
2 |
|
Rigidity(HRA) |
88 |
|
Specification & Usage: |
|
Spe. |
Usage |
|
Volume (ml) |
Diameter (mm) |
Height (mm) |
Thickness of wall (mm) |
It has good chemical stability and abrasion resistance.It can be applied in crush chemical product,rare-earth material and all kinds of silicate material. |
|
500~12000 |
105~245 |
200~300 |
7~10 |
Other Specification of alumina/ corundum milling tank A/B type:
|
Corundum milling tank |
Capacity |
Diameter |
Height |
Thickness |
|
0.3L |
60 |
90 |
7 |
|
0.5L |
80 |
140 |
7 |
|
0.5L |
105 |
140 |
7 |
|
1L |
128 |
182 |
8 |
|
2-3L |
165 |
203 |
8 |
|
4-5L |
200 |
254 |
10 |
|
8-10L |
245 |
340 |
10 |
|
12-15L |
290 |
340 |
10-15 |
Product Photo
